Lithium polymer battery
You are here:Home >> Products >> Lithium polymer battery...
3.7V polymer lithium battery | 505055 1800mAh 3.7V
Product model: XL 505055 3.7V 1800mAh polymer lithium Battery
3.7V polymer battery technical parameters (Specific design can be made according to customer requirements - Voltage/Capacity/Size/Circuit)
Single battery model: 505055
Packaging method: PVC heat shrink film
Wire model: UL3239 22AWG
Wire length: 100mm
The weight of the lithium battery is approximately 30g
Product model: XL 3.7V 1800mAh polymer lithium battery
Technical parameters of 3.7V polymer lithium Battery (Specific design can be made according to customer requirements - voltage/Capacity/Size/Circuit)
Single battery model: 505055
· Single cell voltage: 3.7V
The nominal voltage of the battery pack after combination is 3.7V
· Single-cell battery capacity: 1800mAh
· Battery combination method: 1 series and 1 parallel
· Battery voltage range after combination: 3.0V to 4.2V
· Battery capacity after combination: 1800mAh
· Battery pack power: 6.66W
· Battery pack size: 5*50.5*58mm
· Maximum discharge current: <1.8A
· Instantaneous discharge current: 3.6A to 5.4A
· Maximum charging current: 0.2-0.5C
· Charge and discharge cycles: > 500 times
· Main chips: (Seiko, TI)
3.7V polymer lithium battery
It complies with the relevant national standards and requirements for batteries
All battery products have been calibrated and tested before leaving the factory and can be used directly and normally.